October 26, 2005: NIST Describes WTC Fireproofing Tests

National Institute of Standards and Technology (NIST) releases a 12-page appendix to its final reports on the WTC collapses (see October 26, 2005) detailing tests it conducted on samples of the type of fireproofing used in the WTC. An earlier NIST report had concluded that loss of fireproofing was a major factor in the collapses (see April 5, 2005). The appendix was not included in earlier drafts of the report (see June 23, 2005) [National Institute of Standards and Technology, 6/23/2005 ; National Institute of Standards & Technology, 9/2005, pp. 263-274 ; National Institute of Standards and Technology, 9/2005, pp. 149] NIST conducted a series of fifteen tests. In the tests projectiles were fired at fireproofing mounted on 12 inch x 12 inch plates, and steel bars with a one inch diameter. The fireproofing used in the tests was Blazeshield DC/F, one of the two grades of fireproofing used on the impact floors. In thirteen of the tests the projectiles were buckshot, which was fired at the steel samples from a modified shotgun at a distance of 29.5 ft. The other two tests used steel bolts and hexagon nuts, fired with less velocity and at closer range. According to NIST, “The test results support the assumption that, within the debris field created by the aircraft impact into WTC 1 and WTC 2, the SFRM [i.e., fireproofing] used for thermal insulation of structural members was damaged and dislodged.” [National Institute of Standards & Technology, 9/2005, pp. 83, 263-274 ]